PLEASE NOTE FLASHING THIS FIRMWARE TO NON-DROIDBOX DEVICES IS AT THE USER'S DISCRETION.
People with non-DroidBOX devices are welcome to try this, however only errors encountered or issues created on hardware sold by DroidBOX will be officially supported.
DBX_M6_v6.3.1_Kodi16.1_market.zip from https://1drv.ms/u/s!AlRdlhGu3fjihxS5yWkCsrUr72s3
recovery.img from https://1drv.ms/u/s!AlRdlhGu3fjihxMBdm23zg03iCce
factory_update_param.aml from https://1drv.ms/u/s!AlRdlhGu3fjihxKo6vFzttvNSRVN
Copy the three files to a freshly formatted and empty SD memory card. Make sure the ZIP file is copied as one file. DO NOT extract the contents of this file, the SD memory card should only have:
DBX_M6_v6.3.1_Kodi16.1_market.zip , recovery.img and factory_update_param.aml
on it.
Turn the M6 off and insert the memory card. Locate the reset switch and hold it down. Please don't release it until told to.
The switch is on the right hand side, just behind the two USB sockets.
Turn the device on, and wait until you see the logo come up on your TV. Wait six seconds and you can let go of the reset switch.
Once the firmware flash has completed, you can select the Reboot option. This first boot up, you will find it takes a bit longer than usual to boot up. If any set up screens are presented, complete them and select which launcher you want to use, if asked.
Once you reach the Android launcher homescreen, please wait 20 minutes for applications to complete installing.
People with non-DroidBOX devices are welcome to try this, however only errors encountered or issues created on hardware sold by DroidBOX will be officially supported.
DBX_M6_v6.3.1_Kodi16.1_market.zip from https://1drv.ms/u/s!AlRdlhGu3fjihxS5yWkCsrUr72s3
recovery.img from https://1drv.ms/u/s!AlRdlhGu3fjihxMBdm23zg03iCce
factory_update_param.aml from https://1drv.ms/u/s!AlRdlhGu3fjihxKo6vFzttvNSRVN
Copy the three files to a freshly formatted and empty SD memory card. Make sure the ZIP file is copied as one file. DO NOT extract the contents of this file, the SD memory card should only have:
DBX_M6_v6.3.1_Kodi16.1_market.zip , recovery.img and factory_update_param.aml
on it.
Turn the M6 off and insert the memory card. Locate the reset switch and hold it down. Please don't release it until told to.
The switch is on the right hand side, just behind the two USB sockets.
Turn the device on, and wait until you see the logo come up on your TV. Wait six seconds and you can let go of the reset switch.
Once the firmware flash has completed, you can select the Reboot option. This first boot up, you will find it takes a bit longer than usual to boot up. If any set up screens are presented, complete them and select which launcher you want to use, if asked.
Once you reach the Android launcher homescreen, please wait 20 minutes for applications to complete installing.
Last edited: