Dave C

Well-Known Member
Staff member
Marketing
Sep 1, 2015
1,005
90
48
London
www.droix.co.uk
This firmware is for the DroidBOX T95Z 2GB/16GB and 3GB/32GB models only. Do not attempt to use it on any other device. They are not for ANY other model, even if it has T95Z in the name, they will not work and could damage your machine. Do not flash these files if you do not know which device you have.


You will need a Male to Male USB cable, something like https://www.amazon.co.uk/HAVIT-Cable-Type-Male-Black/dp/B00UF8SEA0/

Download the firmware for your model of T95Z, you can check the label on the bottom of the device to confirm.

T95Z 2GB/16GB Model Firmware

Download from: https://mega.nz/#!PLZR3SaS!DAySSZGj7eFrqWoUcugI8K-W2uyAtWo4g0fb5QZuNDk

T95Z 3GB/32GB Model Firmware

Download from: https://mega.nz/#!rXIiFYAI!UQ5-ZuyuB_j1KlJDX9_QLgLIMKmoxzG1dUlEQm1c0fg

It will be one IMG file, that should not be clicked on to open or extract, we'll use it later. If you see an error message on your PC about the image being corrupt, please close the program, the file is needed for use on the device, rather than the PC.


Next download https://mega.nz/#!uDRkXQKT!N1FnYO6TTpIzGTPaCyGQiEpNiTBhgNEtO2Y2_sYnu9E and open it. You will be asked if you want to install Amlogic's USB Burning tool - you do. Download https://mega.nz/#!bKAzjIYI!ScJ1xaXAC19FTdiqP6gqlZUeCHRwE1NOTJQ5lu9Zm1I and extract and install the drivers.


The first time you open it, click the second menu and select English.


Back in the USB Burning Tool program, click on the "File" menu and click "Import image". Navigate to your Downloads folder and select the IMG file that was downloaded previously.


You'll need to wait a moment whilst it analyzes the file. You should find it automatically ticks the "Erase Flash" and "Erase Bootloader" boxes for you. If "Overwrite Key" is ticked, please remove the tick.


Now click the "Start" button.


Disconnect all cables and peripherals from your T95Z. Connect the USB cable to the USB socket on the T95Z on the right side of the device called USB 1. Then connect it to your PC and let Windows automatically install the drivers it needs.

If it is not recognised, please gently insert a toothpick or similar into the A/V port and press and hold the small switch inside. Connect the power supply and then the USB cable to USB 1 port.


Afterwards, the software will begin flashing the firmware. If it shows a red error message; remove the USB cable from the device, wait a few seconds, then reconnect it. You may need to do this a few times. If after say 4 times, there may be a more serious error with the device, please contact DroidBOX support.


Once the process is complete and reported as successful, you can click the "Stop" button, and disconnect the USB cable. Reconnect the HDMI and power cable and press the Power button. The first time you boot the T95Z, it will take a while longer than usual while it is completing the first time setup, this is normal. Once you can see the launcher's homescreen, please leave the device alone for 10 minutes whilst it re-installs the applications.


Applications continue to install in the background and if interrupted will not resume the next time you boot up.
 

urie

Member
Dec 27, 2017
38
5
8
I actually flashed my tz95 plus thinking this was an upgrade but no just same firmware with the keyboard bug still present when using external keyboard when you press enter, the letter q is displayed thought they would have fixed that.

Now I will need to try and find theGeneric.kl I had edited or edit the original one.
 
Last edited:

basha33

New Member
Nov 21, 2019
1
0
1
I have t95z plus 2/16 ddr3 looking for rpm 7.1.2 working with L1 I am using usb burring tool