GARRHODES

New Member
Apr 12, 2021
1
0
1
Hi folks. 1st time member and I'm wondering if anyone has any experience of the above.
I've had the box 3 months and it has been working fine. Went to power it on the other night and nothing from it, no lights etc. Checked power lead etc but everything is fine, any suggestions?

Many thanks
 

BenDroiX

Guest
Staff member
Jun 19, 2019
285
23
18
It might've just given out. Sometimes with devices you just get bad luck in this sense.

One thing to try would be a re-flash of the firmware. The process is broadly the same across TV boxes, so you can follow this guide: How To Flash The DroiX X3's Firmware - DroiX - https://droix.co.uk/10278-2/
(However, please contact the seller to see if they have the appropriate firmware - using the wrong firmware can further damage/brick the device)

the tl;dr for the process is
> Get an image file for the T95Z's firmware
> Download the AMLogic USB burning tool
> Install it
> Load the image file in the burning tool
> Connect your box to the PC via a male-to-male USB cable
> Start the burning process

Should a reflash not fix things, chase up the seller. If they're like us, you'll hopefully have some kind of warranty to fall back on.